koboldcpp/docs/backend/zDNN.md

llama.cpp for IBM zDNN Accelerator

Warning

Note: zDNN is not the same as ZenDNN.

• zDNN (this page): IBM's Deep Neural Network acceleration library for IBM Z & LinuxONE Mainframes
• ZenDNN: AMD's deep learning library for AMD EPYC CPUs (see ZenDNN documentation)

Background

IBM zDNN (Z Deep Neural Network) is a hardware acceleration library designed specifically to leverage the IBM NNPA (Neural Network Processor Assist) accelerator located within IBM Telum I and II processors. It provides significant performance improvements for neural network inference operations.

Llama.cpp + IBM zDNN

The llama.cpp zDNN backend is designed to enable llama.cpp on IBM z17 and later systems via the IBM zDNN hardware acceleration library.

Software & Hardware Support

Hardware Level	Status	Verified
IBM z17 / LinuxONE 5	Supported	RHEL 9.6, IBM z17, 40 IFLs
IBM z16 / LinuxONE 4	Not Supported

Data Types Supported

Data Type	Status
F32	Supported
F16	Supported
BF16	Supported
Q8_0	Supported

Note: Quantized weights are requantized to int8 with one scale per group of up to 2048 values in each row (or 1024 with GGML_ZDNN_HIGH_PREC=1), after each input channel is divided by its RMS (the activations are multiplied by it instead), and each activation is quantized to two int8 values (about 15 bits). This requires NNPA_PARMBLKFORMAT_1 (IBM z17 / LinuxONE 5).

CMake Options

The IBM zDNN backend has the following CMake options that control the behaviour of the backend.

CMake Option	Default Value	Description
GGML_ZDNN	OFF	Compile llama.cpp with zDNN support
ZDNN_ROOT	""	Override zDNN library lookup

Environment Variables

Environment Variable	Default Value	Description
GGML_ZDNN_HIGH_PREC	0	Set to 1 to requantize Q8_0 weights in smaller groups, for lower loss at lower speed

1. Install zDNN Library

Note: A minimum of libzdnn 1.1.2 is required for the IBM zDNN backend to link correctly.

Install using apt

sudo apt update
sudo apt install -y libzdnn-dev

Install using yum

sudo yum update
sudo yum install -y libzdnn-devel

Install from source

git clone --recurse-submodules https://github.com/IBM/zDNN
cd zDNN

autoreconf .
./configure --prefix=/opt/zdnn-libs

make build
sudo make install

2. Build llama.cpp

git clone https://github.com/ggml-org/llama.cpp
cd llama.cpp

cmake -S . -G Ninja -B build \
    -DCMAKE_BUILD_TYPE=Release \
    -DGGML_ZDNN=ON \
    -DZDNN_ROOT=/opt/zdnn-libs
cmake --build build --config Release -j$(nproc)

3. Run a model

build/bin/llama-server -hf taronaeo/Granite-3.3-2B-Instruct-BE-GGUF:Q4_K_M -fa on

Note: FlashAttention (-fa on) is strongly recommended as it forces attention to run on the IBM zAIU accelerator instead of the CPU (see PR). By default, FlashAttention is turned off.